TES 1-0521V

DC/DC Converter TES 1V Series, 1 Watt • Small SMD package with standard footprint • • • • • I/O isolation voltage 3000 VDC • • High accuracy of pin co-planarity • • Available in tape and reel package Unregulated device Single- and dual output models High efficiency up to 80% Operating temperature range –40°C to +90°C Qualified for leadfree reflow solder process according IPC/JEDEC J-STD-020E The TES 1V series are miniature, 1W DC/DC-converters with high isolation in a SMD package. With a new package design these converters are qualified for the higher temperatures requested by lead-free reflow solder processes. With the small footprint, these converters are the ideal solution for board level power distribution, mainly for applications in the industrial- and telecom field. For automated SMD production lines the devices can be supplied in standard tape and reel package. 3-year product warranty Models Order Code Input Voltage Range TES 1-0510V TES 1-0511V TES 1-0512V TES 1-0513V TES 1-0521V TES 1-0522V TES 1-0523V TES 1-1210V TES 1-1211V TES 1-1212V TES 1-1213V TES 1-1221V TES 1-1222V TES 1-1223V TES 1-2410V TES 1-2411V TES 1-2412V TES 1-2413V TES 1-2421V TES 1-2422V TES 1-2423V www.tracopower.com 4.5 - 5.5 VDC (5 VDC nom.) 10.8 - 13.2 VDC (12 VDC nom.) 21.6 - 26.4 VDC (24 VDC nom.) Output 1 Output 2 Vnom Imax 3.3 VDC 5 VDC 12 VDC 15 VDC +5 VDC +12 VDC +15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC +5 VDC +12 VDC +15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC +5 VDC +12 VDC +15 VDC 260 mA 200 mA 84 mA 67 mA 100 mA 42 mA 34 mA 260 mA 200 mA 84 mA 67 mA 100 mA 42 mA 34 mA 260 mA 200 mA 84 mA 67 mA 100 mA 42 mA 34 mA September 20, 2023 Vnom Efficiency Imax –5 VDC –12 VDC –15 VDC 100 mA 42 mA 34 mA –5 VDC –12 VDC –15 VDC 100 mA 42 mA 34 mA –5 VDC –12 VDC –15 VDC 100 mA 42 mA 34 mA typ. 72 % 75 % 79 % 80 % 75 % 79 % 80 % 73 % 76 % 80 % 81 % 76 % 80 % 80 % 70 % 73 % 79 % 79 % 73 % 79 % 79 % Page 1 / 4 TES 1V Series, 1 Watt Input Specifications Input Current - At no load 5 Vin models: 12 Vin models: 24 Vin models: 5 Vin models: 12 Vin models: 24 Vin models: 5 Vin models: 12 Vin models: 24 Vin models: - At full load Surge Voltage Recommended Input Fuse Input Filter 30 mA typ. 15 mA typ. 8 mA typ. 260 mA max. 110 mA max. 55 mA max. 9 VDC max. (1 s max.) 18 VDC max. (1 s max.) 30 VDC max. (1 s max.) (The need of an external fuse has to be assessed in the final application.) Internal Capacitor Output Specifications Voltage Set Accuracy Regulation - Input Variation (1% Vin step) Ripple and Noise Capacitive Load - Load Variation - Voltage Balance (symmetrical load) - 20 MHz Bandwidth - single output single output models: dual output models: See application note: dual output models: 3.3 Vout models: 5 Vout models: 12 Vout models: 15 Vout models: 5 / -5 Vout models: 12 / -12 Vout models: 15 / -15 Vout models: - dual output Minimum Load Temperature Coefficient Start-up Time Short Circuit Protection ±3% max. (at 60% load, 3.3 & 5 Vout models) ±3% max. (at 100% load, other output models) 1.5% max. 1.5% max. www.tracopower.com/overview/tes1v 1% max. 100 mVp-p max. 33 µF max. 33 µF max. 4.7 µF max. 4.7 µF max. 10 / 10 µF max. 2.2 / 2.2 µF max. 2.2 / 2.2 µF max. 2 % of Iout max. (Operation at lower load will not damage the converter, but it may not meet all specifications) ±0.02 %/K max. 400 ms max. Limited 0.5 s max., Automatic recovery EMC Specifications EMI Emissions EN 55032 class A (with external filter) EN 55032 class A (with external filter) External filter proposal: www.tracopower.com/overview/tes1v - Conducted Emissions - Radiated Emissions General Specifications Relative Humidity Temperature Ranges Power Derating - Operating Temperature - Case Temperature - Storage Temperature - High Temperature Cooling System Switching Frequency Insulation System Isolation Test Voltage Isolation Resistance - Input to Output, 60 s - Input to Output, 500 VDC 95% max. (non condensing) –40°C to +90°C +105°C max. –50°C to +125°C 3.3 %/K above 75°C See application note: www.tracopower.com/overview/tes1v Natural convection (20 LFM) 50 - 150 kHz (PFM) 100 kHz typ. (PFM) Functional Insulation 3'000 VDC 10'000 MΩ min. All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated. www.tracopower.com September 20, 2023 Page 2 / 4 TES 1V Series, 1 Watt Isolation Capacitance - Input to Output, 100 kHz, 1 V Reliability Moisture Sensitivity (MSL) Washing Process Housing Material Pin Material Pin Foundation Plating Pin Surface Plating Housing Type Mounting Type Connection Type Footprint Type Soldering Profile - Calculated MTBF 60 pF typ. 100 pF max. 2'000'000 h (MIL-HDBK-217F, ground benign) Level 2 (J-STD-033C) Not allowed Non-conductive Plastic (UL 94 V-0 rated) Phosphor Bronze (C5191) Copper (1 - 3 µm) Tin (7.5 µm min.), matte Plastic Case PCB Mount SMD (Surface-Mount Device) SMD12 Lead-Free Reflow Soldering (acc. J-STD-020E) See application note: www.tracopower.com/info/reflow-soldering.pdf 2g www.tracopower.com/info/reach-declaration.pdf REACH SVHC list compliant REACH Annex XVII compliant www.tracopower.com/info/rohs-declaration.pdf Exemptions: No Exemptions Weight Environmental Compliance - REACH Declaration - RoHS Declaration Supporting Documents Overview Link (for additional Documents) www.tracopower.com/overview/tes1v 3.0 (0.12) 1.8 (0.07) (0.1) 5 2.54 (0.2) (0.1) (0.64) M .5 2) R0 6 5.08 16.3 (R 0. 0 7 8.0 (0.1) ° 0-4 (0.43) 8 3 2.54 2.54 0.1 (0.22) 10 2 (0.01) (for reflow soldering process) (0.12) 1 0.25 8.0 ±0.5 0.3 5.5 11.0 11 1.5 (0.06) Ø1.0 (Ø 0.04) vent hole (0.31) 3.0 12 (0.01) 0.6 (0.02) (0.31 ±0.02) (0.004) Outline Dimensions Pinout Pin Single Dual 1 –Vin (GND) –Vin (GND) 2 +Vin (Vcc) +Vin (Vcc) 3 NTC NTC 5 –Vout Common 6 NTC –Vout 7 NTC NTC 8 +Vout +Vout 10 NTC NTC 11 NTC NTC 12 NTC NTC NTC: Not to connect Dimensions in mm (inch) Pin pitch tolerances: ±0.13 (±0.005) Other tolerances: ±0.25 (±0.01) All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated. www.tracopower.com September 20, 2023 Page 3 / 4 TES 1V Series, 1 Watt 2.2 1.2 min. (0.05) (0.49) 12.4 (0.09) Recommended Solder Pad Layout 2.54 2.54 (0.1) (0.1) 5.08 2.54 (0.2) (0.1) Dimensions in mm (inch) © Copyright 2023 Traco Electronic AG Specifications can be changed without notice. www.tracopower.com Rev. September 20, 2023 Page 4 / 4